Nowadays, in the plastic processing industry of the society, the injection molding machine is the most widely used processing machine. We have a large number of daily necessities in our lives that are directly produced by injection molding machines. This has led us to the injection molding machine injection process, there are many companies will have an excessive increase in the injection molding machine has a problem, so that it will be a great deal of damage to the injection molding machine machinery and equipment. Below, Dongguan energy-saving injection molding machine to share it for everyone!

First, the temperature rise of the plastic injection molding machine will cause the shape of the rubber seal to change. This not only accelerates the aging failure of the injection molding machine, but also reduces the sealing performance while also leading to the use of the time, causing plastic leakage.

Second, if the temperature of the plastic injection molding machine rises too high, the quality of the product will decline when the component is in operation. The oil dissolves the air during work and escapes. This also causes cavitation, which leads to a decrease in the working performance of the hydraulic system.

Third, the temperature rise of the plastic injection molding machine will lead to mechanical thermal deformation. The difference in the coefficient of thermal expansion coefficient of the hydraulic element in the hydraulic element is stuck due to its small training experience, causing malfunction, affecting the hydraulic system's transmission accuracy, resulting in poor working quality of the component.

Fourth, the temperature rise of the plastic injection molding machine will cause the viscosity of the injection molding machine oil to drop. The oil leakage of the injection molding machine will increase during the work, and the volumetric efficiency of the injection molding machine pump and the efficiency of all the machine systems will be significantly reduced. Because the viscosity of the oil is reduced, the oil film of moving parts such as a machine inside the injection molding machine will become thin and cut, and the frictional resistance of the machine will increase, resulting in increased wear of the injection molding machine.

Fifth, if the temperature of the plastic injection molding machine rises too high, it will accelerate the oxidation of the oil and deteriorate, and the substance of the asphalt will be resolved, and the hydraulic oil will be reduced, thus leading to the use of time. The precipitated material blocks the small orifices and the gap-like orifices. This not only results in the pressure valve of the injection molding machine being stuck but the injection molding machine cannot work, and the metal pipeline is bent or even broken due to elongation. Wait.

The above content is just a personal view of Xiaobian. If you want to learn more about Dongguan energy-saving injection molding machine, you can consult our hotline: 13326865879, or log on our official website: http://www.gdruibao.com/