Now that the injection molding machine industry is highly competitive in the market and its profits are low, many companies are starting to reduce production costs on machinery and equipment, such as large-scale companies that retrofit on barrel heating coils and servo motors for energy-saving injection molding machines. Plus energy-saving technology. Take the most popular injection molding machine on the market. If we put the barrel heating coil of the most popular injection molding machine on the market into an infrared energy-saving heating coil, the power per hour can save energy and save 4 percent. However, many injection molding machines will have an overheating problem after the energy-saving heating coil is reformed. Then, how should we solve the issue of overheating? The following Xiaobian and everyone to understand it!

The first method is to cut the position of the thermal insulation cotton thermocouple in an over-temperature zone so that he can dissipate heat.

The second method is to set the temperature of the temperature zone in the over temperature section lower.

In addition to temperature-sensitive materials, most other hoppers can be solved by lowering the set temperature. Of course, it may be because the back pressure adjustment is too large, the screw idle or slipping caused by the extension of the melting time, the heat generated by the friction, the set temperature is too low, resulting in too much resistance of the adhesive, friction heat.

  The above content is just a personal view of Xiaobian. If you want to learn more about the injection molding machine, you can consult our hotline: 13326865879, or log on our official website: http://www.gdruibao.com/